Tag: Clientless

Clientless SSL VPN Lab

In this post I’m going to setup a Clientless SSL VPN via the ASDM GUI and then connect to it via the TinyCore Linux PC all from GNS3.

Topology:

LAB_SSL_CL

I’m using the topology above. The nodes I’m using will be the ASA with the ASDM connected via the cloud from my local PC, if you want to know how to set the ASA up with access via the ASDM check out one of my other posts: How-To: ASA in GNS3 with ASDM

I’ll also be using R4 and the Remote Worker PC which is running a TinyCore Linux to test the Clientless SSL VPN.

Configure the Clientless SSL VPN on the ASAv via the ASDM GUI

ASDMmainscreen

When you log into the ASDM GUI you’ll get the main screen above. Click on Wizards > VPN Wizards > Clientless SSL VPN Wizard…

ASDM_Wizard

The Clientless SSL VPN Wizard window will pop up, click on Next. You’ll get the following window.

Step2_SSL

Here you need to give your Clientless SSL VPN a Connection Profile Name I’ve named this one SSL_Remote_Access and I’ve also selected the Interface that the SSL VPN will connect in on which is the Outside Interface (Internet). I don’t have my own digital certificate so I’m leaving the Certificate set to None, because of this the ASA will provide a self signed certificate. I’ve also given the Connection an Alias of SSL. Click on Next

step3_auth.png

The next step is to configure User Authentication you’ll have the choice to use an AAA server (which I dont have) or the Local User DB which I’ve selected. Select Authenticate using the local user database and add a new user, here I’m adding Homer once added click on Next

Step4_GroupPolThe next step is to setup a group policy or select an existing policy. Here I’ve setup a new policy called Remote_Users, this policy will inherit the DfltGrpPolicy attributes which I can change later if I need to. Click on Next

Step5_Bookmark

In the next step you can configure a list of bookmarks that the Remote users will be able to click on to access resources on the Corp LAN. Click on Manage > Add

Here you give the bookmark a name like EMAIL. Click on Add

Step5_BM2

You need to configure the IP address of the EMAIL server. I don’t have an email server in my lab but the bookmark will appear once I connect to the Clientless SSL VPN (hopefully).

step6_finish.pngThat is it, you’ll get a summary page click on Finish to send the config to the ASA.

With the ASA configured the next step is to configure R4 in my topology. I’ll have to give Gi0/1 an IP address (200.0.0.1/24) and also a default route to send all traffic to the ASA using the command “ip route 0.0.0.0 0.0.0.0 136.1.47.1” as shown below.

R4

Next configure the TinyCore Linux PC with an IP address in the same range as Gi0/1 I’ll use 200.0.0.2 and set the default gateway to 200.0.0.1.

tinylinux

To configure an IP address on the Linux PC click on Control Panel > Network

Set the IP address and the Gateway and click on Apply

It is always good practice to test the connectivity, open a Terminal Window in the Linux PC and ping the Gateway at 200.0.0.1.

pingR4

Now using the built-in Firefox browser on the Linux PC it is time to test the Clientless SSL VPN and see if we can connect to the Corp LAN. In the address bar enter the URL  configured earlier which is: https://136.1.47.1/SSL

SSLConnection

Looks good because this is a self signed certificate from the ASA the Firefox brower gives you a warning not to trust the site. Click on I Understand the Risks to continue. Once you accept the risk you will get the following login page.

SSL VPN Login

Enter in the username and password in my case Homer.

LoggedIn

Success !! I have logged in and as you can see the EMAIL bookmark I configured during the Clientless SSL VPN setup is there.

I hope you found this useful, get labbing and try it out for yourself.

Feedback always welcomed.